2009-12-20

Way to design a heating system

When it gets really cold the condense pipe freezes and the boiler stops working.
What idiot designed a system that causes the heating to shut down when it actually gets cold.

I am heading outside with a hot kettle to try and melt the frozen condense pipe.

...

That may have cleared it. But need to find the bit of lagging that has come off.

My son just asked why it needs to go outside. Excellent question. I looked. Running the pipe through wall to utility room and in to the drain there would have been a way simpler route and involved a hole in an interior rather than exterior wall. Damn plumber.

2 comments:

  1. The condensate drain should be routed in 40mm waste pipe if its outside.
    Ive seen loads routed in overflow pipe, gets cold and freezes.
    Its better done inside, looks better too!

    ReplyDelete
  2. It is a big waste pipe, which is plumber never lagged it initially.

    ReplyDelete

Comments are moderated purely to filter out obvious spam, but it means they may not show immediately.

Fencing

Bit of fun... We usually put up some Christmas lights on the house - some fairy lights on the metal fencing at the front, but a pain as mean...