Yes, I have managed it. At long last. I have managed to print a thing out of ABS. A pink TARDIS (and why not).
The issues of the last week have been many, and mostly stem from a loose grub screw on the belt drive on the stepper motor. But there have also been issues with the hot bed sliding a little and also the stepper controllers missing (too low torque) or stalling (over temp shutdown). And then there were the fires. Feasible theories for most of them. I have spare controllers now :-)
Today has been almost as fun, but the problems have been in the firmware. Turns out it is almost as special as the hardware. Thankfully an area I am a lot happier tinkering.
I am sure there is plenty of fine tuning that can now be done to make the quality even better, but this is looking pretty good compared to anything I have printed before, so I am reasonably pleased.
Of course there is something of a TARDIS graveyard (and this is not all of them).
2011-06-30
Subscribe to:
Post Comments (Atom)
Fencing
Bit of fun... We usually put up some Christmas lights on the house - some fairy lights on the metal fencing at the front, but a pain as mean...
-
Broadband services are a wonderful innovation of our time, using multiple frequency bands (hence the name) to carry signals over wires (us...
-
For many years I used a small stand-alone air-conditioning unit in my study (the box room in the house) and I even had a hole in the wall fo...
-
It seems there is something of a standard test string for anti virus ( wikipedia has more on this). The idea is that systems that look fo...
A pink TARDIS is just *wrong*! :-)
ReplyDeleteCheers, Howard
"Look at my pink TARDIS"
ReplyDelete"It's, umm, rather small..."
"No, no. It may look small but trust me it's really much bigger on the inside"